The JMB / C traffic controller, with advanced microcomputer chip technology, dedicated to the regeneration control of the flow type of water treatment equipment. The controller can be used for multi-tank filter composed by the multi-valve or multi-way valve, softening, desalination and other independent control of the system, the instantaneous flow, the remaining amount and the accumulated water regeneration program pre-setting, system status display other control equipment chain control special features.
Controller performance characteristics : 1. Set password protection 2. JMB single-or JMC1-3-way multi-channel flow meter pulse receiver 3. The K value of the flowmeter probe choose to install the pipe size (according to the probe in Schedule query) 4. The system flow rate (0-999t / h) and pre-set quantities of (1-9999.9t) diminishing the remaining amount display 5. Cumulative flow of inquiries and clear functions 6. Status display of the brightest systems (work, renewable, alternate feedback) 7. Local forced to manually start the regeneration 8. Regeneration start signal output time (2-9999 seconds) is set 9. System operating modes: the JMC (C1, D2, D3, and of E2, E3), five kinds 10. The JMB (C1, C2, C3, C4, and C5, D2, D3, and D4, D5), nine kinds Note: Type C: to run simultaneously in turn regeneration; type D: more than one standby; E-type: run, respectively regeneration 11. Regeneration system (water solenoid valve control) Auxiliary contact output 12. Power failure protection function: set parameters remain after the power failure for more than 3 years 13. Instrument shell is made of engineering plastics, dust, corrosion, waterproof sputtering 14. Meter wall mounted or bracket to hang the installation form The main technical indicators 15. Flow sensor pulse input: sine wave frequency range 0-10K probe (DC) voltage range 4-12V 16. Sampling period: 0.2 seconds 17. Output forms: dry contact relay output contact capacity, AC220V/2A 18. Feed input: passive contact feedback signal 19. Display: backlit LCD unit, service life ≥ 10 years 20. Instrument power supply: Switching Power Supply 100-265V/AC power consumption of 5W 21. Use of the environment: ambient temperature 4-60 ℃ Relative humidity ≤ 85% RH 22. Controller Shell Size: 260X170X105mm
|